AT-2450FT/ST - UTP and
Fiber/ST
Features:
- PCnet II Chipset - works in linux too!
- Auto-configurable on power-up
- Fully supports 10Mbps Ethernet
over Fiber IEEE 802.3 10Base-FL standard
- Supports network segments to 2 km
in Full-Duplex mode
- Ideal for use in
"electrically noisy" environments
- High performance 32-bit PCI bus,
version 2.1 compatible
- Includes McAfee VirusScan for
Windows 95
- The industry's only "On-Line
Help" with Website Link
- Supports all major network
operating systems
- BootROM socket and BootWare
available for centralized/remote booting
- Free Technical Support
- Lifetime warranty with advance
replacement
Manual is HERE
High Performance over Fiber
Take advantage of the benefits of fiber
optic technology using familiar Ethernet protocol and
fiber adapter cards from the world leader, Allied
Telesyn. Fiber features security, dramatically extended
distances and more efficient network management. Extend
network segments to 2 kilometers. Ideal for use in
"electrically noisy" environments and in
backbone or campus environments where longer cabling
distances are required.
Allied Telesyn's AT-2450FT adapter
cards connect high performance computers with a PCI
architecture to Ethernet over fiber networks. The PCI Bus
Master architecture minimizes CPU utilization, freeing
your computer's power for the most memory-intensive
applications. These high performance adapters, utilize
the 32-bit PCI bus architecture which transfers data at
speeds up to 33Mhz and has data throughput rates as high
as 132Mbytes/second, up to 16 times faster than the
traditional ISA bus. Both high-speed systems and
applications requiring transfer of multimedia and video
data will benefit from this solution. Full-Duplex
operation enables the AT-2450 to transmit and receive
data simultaneously.
Quick, Easy Installation
The AT-2450 Series PCI adapter cards
are auto-configurable, dramatically reducing installation
time. Allied Telesyn gives you the industry's only
"On-Line-Help" feature in addition to
diagnostic software and four visible LEDs to assist in
installation and troubleshooting. The cards are available
with a RJ45/UTP connector for copper and a fiber
connector; ST (twist-on) connector, or the new SC
(push-on) connector. The media port automatically senses
which media is active when the network cable connector is
attached, eliminating software set-up programs.
Compatibility
The AT-2450 is fully compatible with
PCI v2.1, IEEE 802.3 and ISO/IEC 8802-3 specifications. A
full set of certified network drivers is included for the
most popular operating environments in the industry.
Superior Support
Allied Telesyn offers a lifetime
warranty with advance replacement and free unlimited
technical support. Updated and enhanced drivers and
features are available 24 hours a day on the Allied
Telesyn website, BBS and ftp server. Included FREE of
charge is McAfee VirusScan for Windows 95, the world's
best virus detection and removal software. For added
network integrity and security, a BootROM socket and
BootWare are available for centralized software
distribution or remote booting.
Technical
Specifications
Status Indicators
Transmit |
Indicates
that a packet is being transmitted to the media |
Receive |
Indicates that
packets are being received from the media |
Link |
Indicates that a
valid receive link exists |
Collision |
Programmable to
indicate collision or Full-Duplex |
PC Interface
Bus Interface |
PCI 2.1 compliant |
Bus Width |
32-bit |
Data Transfer Mode
|
PCI 2.1 Bus
Mastering |
Ethernet Interface
10Base-FL |
62.5/125
micron multimode fiber with ST (twist-on) or SC
(push-on) connectors |
10Base-T |
EIA/TIA
categories 3, 4 or 5 with RJ45/UTP |
Programmable Settings
Hardware
Interrupts: |
PCI
INT#A, supports shared or assigned interrupts |
Base
I/O Memory Address |
Assigned
by BIOS
PCI configuration space supports DWORD, WORD and
BYTE access |
Reliability
Calculated MTBF > 500,000 hrs
Standards Compliance
IEEE 802.3u 10Base-FL
IEEE 802.3u 10Base-T
Maximum Cabling Distances
Fiber:
|
|
Full-Duplex |
2 km |
Half-Duplex |
400 m |
Copper (UTP): |
100 m |
Power Requirements
Supply |
+5 VDC @ 5 W
(typical) |
Physical Characteristics
Dimensions: |
10.7 cm x 15.3 cm |
|
(4.2 in x 6.4 in) |
|
Half Size form
factor |
|
|
Weight: |
120 grams (4.2 oz) |
|
|
Temperature |
|
Operating |
+10° - 55° C |
|
|
Humidity |
|
Operating |
85% at +55 C |
|
|
Electrical
Approvals: |
|
FCC
Class B, VDE Class B, CE, UL, CSA, TUV-GS |
Driver Support
NDIS
2.01 |
Artisoft
LANtastic
Banyan Vines Client
DEC Pathworks
FTP PC/TCP for DOS
IBM LAN Server, OS/2, WARP
Microsoft LAN Manager, DOS and OS/2
Microsoft Windows 3.1, 3.11
Microsoft WfW v3.11
NetManage Chameleon
SunSoft PC/NFS |
NDIS
3.0 (MAC) |
Microsoft
WfW v3.11 |
NDIS
3.1 (Mini Port) |
Microsoft
Windows NT 3.51, 4.0
Microsoft Windows 95 |
ODI
Client |
Novell
NetWare DOS Client, NetWare v3.x Client, Personal
NetWare, Microsoft WfW v3.11 |
ODI
Server |
Novell
NetWare v3.x and above server
Wollongong Pathway Access, Pathway Client NFS,
TCP for DOS |
UNIX |
SCO,
UnixWare |
Ordering Information
Part
Number |
Description |
AT-2450FT/ST |
PCI Ethernet
adapter card with UTP connector for copper and ST
connector for fiber |
AT-2450FT/SC |
PCI Ethernet
adapter card with UTP connector for copper and SC
connector for fiber |
AT-BW2450 |
BootWare Boot
PROMs for AT-2450 Series adapter cards |
20 packs are
available for additional savings |
|