From the OmniStack Version 3.4.11.35 (B) the commands are: 

<h3>Command Main Menu</h3>
<pre>
File Manage system files 
Summary Display summary info for VLANs, bridge, interfaces, etc. 
VLAN VLAN management 
Networking Configure/view network parameters such as routing, etc. 
Interface View or configure the physical interface parameters 
Security Configure system security parameters 
System View/set system-specific parameters 
Services View/set service parameters 
Switch Enter Any to Any Switching Menu 
Help Help on specific commands 
Diag Display diagnostic level commands 
Exit/Logout Log out of this session 
</pre>

<h3>Command File Menu</h3>
<pre>
load Download system software using the serial interface 
ftp Download from an FTP server 
pwd Display the current working directory 
ls List the contents of the current working directory (default 
working directory is /flash) 
rm Remove a file 
cp Copy a file 
view View an ASCII file 
edit Edit buffer locally 
imgcl Remove all image files 

</pre>

<h3>Command Summary Menu </h3>
<pre>
ss Display MIB-II System group variables 
sc OmniStack chassis summary 
si Current interface status 
</pre>

<h3>
Command VLAN Management Menu </h3>
<pre>
gp View the list of Groups currently defined 
crgp Create a Group 
modvl Modify a VLANs configuration/availability 
rmgp Delete a Group 

addqgp Add 802.1q group/s to a 10/100 Ethernet port 
delqgp Delete 802.1q group/s from a 10/100 Ethernet port 
viqgp Display 802.1 groups on 10/100 Ethernet port/s 
viqs Display 802.1q stats on a port 
addtggp Add 802.1q group to a Gigabit Ethernet port 
deltggp Delete 802.1q group from a Gigabit Ethernet port 
vitggp Dislay 802.1 groups on a Gigabit Ethernet port 
via View ports assigned to the selected Group 
vi View info on a specific virtual port 
vs View statistics on a virtual port attachment 
ve View errors on a virtual port attachment 

addvp Add ports to a GROUP 
modvp Modify existing VPORT configuration information 
rmvp Remove ports from a Group 

br Enter the Bridge Configuration/Parameter sub-menu 
at Enter the Auto-Tracker sub-menu 
pmapping Port Mapping 
</pre>

<h3>
Command Bridge Management Menu</h3>
<pre> 
fls Display Flood Limit on selected Group 
flc Configure Flood Limit on selected Group 
sts Display Spanning Tree parameters on selected Group 
stc Configure Spanning Tree parameters on selected Group 
stps Display Spanning Tree Port parameters on selected VLAN 
stpc Configure Spanning Tree Port parameters on selected VLAN 
srs Display Source Routing parameters on selected Group 
src Configure Source Routing parameters on selected Group 
fwt Display Bridge Forward table on selected VLAN 
fs Display Bridge Static Address 
fc Configure Bridge Static Address 
bps Display Bridge Port Statistics on selected VLAN 
macinfo Locate learned Bridge MAC address in this chassis 
selgp A Group can be selected for the bridge operations 
or to generate MIB reports 
rts Display remote Trunking Stations discovered 
dbrmap View the Domain Bridge Mapping table 
+ / - Select next / previous VLAN 
</pre>

<h3>
Command Auto-Tracker Management Menu </h3>
<pre>
cratvl Create an Auto-Tracker VLAN 
atvl View definition of AutoTracker VLAN 
viatrl View Auto-Tracker Rule Configuration 
rmatvl Delete an Auto-Tracker VLAN 
modatvl Modify definition of an Auto-Tracker VLAN 
vivl View list of Active Auto-Tracker VLANs on an interface 
fwtvl View VLAN assignment of learnt MAC Addresses 
defvl Enable or disable membership in default vlan 
crmcvl Create a Multicast VLAN 
mcvl View definition of Multicast VLAN 
vimcrl View the IP to MAC Address Association table 
</pre>

<h3>
Command IPX Menu</h3>
<pre>
ipxr View IPX routes. 
ipxs View IPX stats and errors 
ipxsap View IPX SAP bindery 
aipxsr Add an IPX static route 
ripxsr Remove an IPX static route 
ipxoff Turn off the IPX router complex 
ipxon Turn on the IPX router complex 
ipxflush Flush IPX router RIP and/or SAP tables 
ipxping IPX Ping a system 
ipxfilter Add/delete an IPX RIP/SAP filter 
ipxf Display IPX RIP/SAP filters 
ipxserialf Enable/Disable IPX Serialization Packet Filtering 
ipxspoof Enable/Disable IPX Watchdog Spoofing 
spxspoof Enable/Disable SPX Keepalive Spoofing 
ipxtype20 Turn on/off forwarding of IPX Type 20 packets 
ipxdrt Turn on/off a default route for IPX 
ipxext Turn on/off extended IPX RIP and SAP packets 
</pre>

<h3>
Command Port Monitoring Menu </h3>
<pre>
pmon Port monitor utility 
pmcfg Configure port monitor parameters 
pmstat View port monitor statistics 
pmd Port monitor disable 
pmp Port monitor pause 
</pre>

<h3>
Command Physical Interface Menu </h3>
<pre>
slipc Configure SLIP (Serial Line IP) on a TTY Port 
10/100 Enter the 10/100BaseT sub-menu 
atm Enter the ATM Management sub-menu 
</pre>

<h3>
Command 10/100BaseT Menu </h3>
<pre>
10/100vc View the 10/100BaseT Port Configuration Table 
10/100cfg Configure 10/100BaseT Port Parameters 
crechnl Create a Fast Ethernet Channel 
delechnl Delete a Fast Ethernet Channel 
addprtchnl Add port/s to a Fast Ethernet Channel 
delprtchnl Delete port/s from a Fast Ethernet Channel 
chnlinfo Display channel configuration parameters 
</pre>

<h3>
Command ATM Management Menu </h3>
<pre>
vap View the list of atm ports configurations 
map Modify an atm port configuration 
vvc View virtual channel connections 
cvc Create a virtual channel connection 
mvc Modify a virtual channel connection 
dvc Delete a virtual channel connection 
vva View virtual atm addresses 
cva Create a virtual atm address 
mva Modify a virtual atm address 
dva Delete a virtual atm address 
vlat View ATM LANE LE_ARP table 
vat View ATM CIP Arp table 
aat Add static ATM Arp entry for CIP 
dat Delete static ATM Arp entry for CIP 
vss View ATM Service statistics 
vls View atm layer statistics table 
vlrs View atm layer rx error statistics table 
vlts View atm layer tx error statistics table 
vcs View atm connection statistics table 
vcrs View atm connection rx error statistics table 
vcts View atm connection tx error statistics table 
vbwg View the bandwidth group table 
mbwg Modify the bandwidth group table 
</pre>

<h3>
Command Security Menu </h3>
<pre>
pw Set a new password for a login account 
reboot Reboot this system 
timeout Configure Auto Logout Time 
</pre>

<h3>
Command System Menu </h3>
<pre>
info Basic info on this system 
dt Set system date and time 
ser View or configure the DTE or DCE port 
mpm Configure a Management Processor Module 
slot View Slot Table information 
systat View system stats related to system, power and environment 
tasksta
</pre>

<h3>
Command System Menu</h3>
<pre>
info Basic info on this system 
dt Set system date and time 
ser View or configure the DTE or DCE port 
mpm Configure a Management Processor Module 
slot View Slot Table information 
systat View system stats related to system, power and environment 
taskstat View task utilization stats 
memstat View memory use statistics 
fsck Perform a file system check on the flash file system 
newfs Erase all files from flash directory and create a new filesystem 
syscfg View/Configure info related to this system 
camstat View CAM info and usage 
camcfg Configure CAM info and usage 
ver/ter Enables/disables automatic displ
camcfg Configure CAM info and usage 
ver/ter Enables/disables automatic display of menus on entry 
echo/noecho Enable/disable character echo 
chpr Change the prompt for the system 
logging View system logs 
health Set health parameters or view health statistics 
</pre>

<h3>
Command Services Menu </h3>
<pre>
cas Create a service (PTOP bridging/Classical IP/Trunking/LANE) 
mas Modify a service 
das Delete a service 
vas View a service 
</pre>