Linux version 2.4.20-32 (root@Magnum) (gcc version 3.0.4) #1 Wed Jan 8 22:51:42 CET 2003 FP[0] enabled: Rev 1 Model 13 The 32-bit Kernel has started... Determining PDC firmware type: Snake. model 00006000 00000481 00000000 00000000 77a0392e 00000000 00000004 00000072 00000072 vers 0000000c model 9000/712 Total Memory: 64 Mb pagetable_init On node 0 totalpages: 16384 zone(0): 16384 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: root=/dev/sda3 HOME=/ console=tty0 sti=1 sti_font=VGA8x16 TERM=linux palo_kernel=3/boot/vmlinux Console: colour dummy device 160x64 Calibrating delay loop... 59.80 BogoMIPS Memory: 61488k available Dentry cache hash table entries: 8192 (order: 4, 65536 bytes) Inode cache hash table entries: 4096 (order: 3, 32768 bytes) Mount-cache hash table entries: 1024 (order: 1, 8192 bytes) Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 16384 (order: 4, 65536 bytes) Searching for devices... Found devices: 1. Gecko GSC Core Graphics (10) at 0xf8000000 [1], versions 0x16, 0x0, 0x85 2. Gecko Core BA (11) at 0xf0100000 [2], versions 0x16, 0x0, 0x81 3. Gecko Core SCSI (10) at 0xf0106000 [2/0/1], versions 0x16, 0x0, 0x82 4. Gecko Core LAN (802.3) (10) at 0xf0107000 [2/0/2], versions 0x16, 0x0, 0x8a 5. Gecko Core RS-232 (10) at 0xf0105000 [2/0/4], versions 0x16, 0x0, 0x8c 6. Gecko Core Centronics (10) at 0xf0102000 [2/0/6], versions 0x16, 0x0, 0x74 7. Gecko Audio (10) at 0xf0104000 [2/0/8], versions 0x16, 0x0, 0x7b 8. Gecko Core PC Floppy (10) at 0xf010a000 [2/0/10], versions 0x16, 0x0, 0x83 9. Gecko Core PS/2 Port (10) at 0xf0108000 [2/0/11], versions 0x16, 0x0, 0x84 10. Gecko Core PS/2 Port (10) at 0xf0108100 [2/0/12], versions 0x16, 0x0, 0x84 11. Gecko (712/60) (0) at 0xfffbe000 [8], versions 0x600, 0x0, 0x4 12. Memory (1) at 0xfffbf000 [9], versions 0x26, 0x0, 0x9 CPU(s): 1 x PA7100LC (PCX-L) at 60.000000 MHz Lasi version 0 at 0xf0100000 found. POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Gecko-style soft power switch enabled. Starting kswapd Journalled Block Device driver loaded Installing knfsd (copyright (C) 1996 okir@monad.swb.de). parport_init_chip: initialize bidirectional-mode. parport0: PC-style at 0xf0102800, irq 88 [PCSPP,TRISTATE] STI GSC/PCI graphics driver version 0.9 STI word mode ROM at f0080000, hpa at f8000000 STI id 2b4ded6d-40a00499, conforms to spec rev. 8.04 STI device: HPA208LC1280 Console: switching to colour frame buffer device 160x64 fb0: stifb 1280x1024-8 frame buffer device, id: 2b4ded6d, mmio: 0xf8100000 pty: 256 Unix98 ptys configured PDC Software Console version 0.3 (2001-11-17), christoph.plattner@gmx.at Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled ttyS00 at iomem 0xf0105800 (irq = 90) is a 16550A PS/2 keyboard port at 0xf0108000 (irq 69) found, device attached. PS/2 psaux port at 0xf0108100 (irq 69) found, device attached. lp0: using parport0 (interrupt-driven). Generic RTC Driver v1.02 05/27/1999 Sam Creasey (sammy@oh.verio.com) Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx RAMDISK driver initialized: 16 RAM disks of 6144K size 1024 blocksize loop: loaded (max 8 devices) Found i82596 at 0xf0107000, IRQ 87 eth0: 82596 at 0xf0107000, 08 00 09 E2 5A A6 IRQ 87. 82596.c $Revision: 1.30 $ SCSI subsystem driver Revision: 1.00 53c700: Version 2.8 By James.Bottomley@HansenPartnership.com scsi0: 53c710 rev 2 scsi0 : LASI SCSI 53c700 scsi0: (6:0) Synchronous at offset 8, period 100ns Vendor: QUANTUM Model: FIREBALL1050S Rev: 630C Type: Direct-Access ANSI SCSI revision: 02 Attached scsi disk sda at scsi0, channel 0, id 6, lun 0 SCSI device sda: 2051460 512-byte hdwr sectors (1050 MB) Partition check: sda: sda1 sda2 sda3 Lasi Harmony Audio driver V0.9a, h/w id 20, rev. 0 at 0xf0104000, IRQ 82 usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb.c: registered new driver hid hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik hid-core.c: USB HID support drivers mice: PS/2 mouse device common for all mice HP SDC: No SDC found. HP SDC MLC: Registering the System Domain Controller's HIL MLC. HP SDC MLC: Request for raw HIL ISR hook denied md: linear personality registered as nr 1 md: raid0 personality registered as nr 2 md: raid1 personality registered as nr 3 md: raid5 personality registered as nr 4 raid5: measuring checksumming speed 8regs : 45.600 MB/sec 8regs_prefetch: 45.600 MB/sec 32regs : 64.400 MB/sec 32regs_prefetch: 64.400 MB/sec raid5: using function: 32regs_prefetch (64.400 MB/sec) md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 4096 bind 8192) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 251k freed Adding Swap: 123792k swap-space (priority -1) EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,3), internal journal eth0: link ok.